Differences

This shows you the differences between two versions of the page.

--- public:home_assistant [2024/12/11 10:19] – lukas
+++ public:home_assistant [2026/11/11 06:24] (current) – [Remote Console] lukas
@@ Line 1: / Line 1: @@
-====== Tenovice ======
+====== Remote Console ======
-https://www.hadex.cz/m447b-indikator-sitoveho-napeti-230v-ac-s-optoclenem/\\
+minicom can use it by connecting through a virtual serial port created with socat. On the computer where you’ll run minicom.\\
-https://www.hadex.cz/m378b-vyvojova-deska-arm-stm32f103c8t6/\\
+Prepareation:
+<code>
+sudo apt install socat minicom
+mkdir -p ~/dev
+</code>
+Open Socket:
+<code>
+socat pty,link=$HOME/dev/ttyV0,rawer,echo=0,waitslave tcp:10.10.1.111:6638
+</code>
+Connect with minicom:
+<code>
+minicom -D ~/dev/ttyV0 -b 115200 -C serial_output01.log
+</code>
 ====== Current_measurement ======
@@ Line 12: / Line 24: @@
 ====== Home Assistant on 32bit ======
 https://community.home-assistant.io/t/hass-hassos-on-an-old-32-bit-laptop/400235\\
+https://blog.lesterpig.com/post/install-home-assistant-core-2025.12-on-armv7/\\
 ====== OPOP Integration ======
@@ Line 21: / Line 34: @@
 https://www.root.cz/serialy/home-assistant-a-domaci-automatizace/
+====== Home Assistant on 32bit arm ======
+ghcr.io/home-assistant/qemuarm-homeassistant:2025.11
+====== Build Home Assistant on 32bit arm ======
+[[public:home_assistant-docker-cache|Home Assistant Docker Cache]]\\
+[[public:home_assistant-docker-no-cache|Home Assistant Docker No Cache]]\\
+[[public:home_assistant-docker-beter-division|Home Assistant Docker Better Division]]\\
+[[public:home_assistant-docker-merge-last-armv7-image|Home Assistant Docker merge last armv7 image with actual one]]\\
+[[public:home_assistant-docker-builded-image|Home Assistant Docker builded image armv7]]\\
+[[public:home_assistant-docker-build-wheels|Home Assistant Docker build wheels for armv7]]\\
+https://contributors.home-assistant.io/core/development/environment/#manual-setup\\
+==== 1. Zapněte podporu QEMU v Dockeru ====
+<code>
+docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
+</code>
+==== 2. Vytvořte čistý Buildx Builder (Doporučeno) ====
+<code>
+# Odstranění starého builderu (pokud existuje)
+docker buildx rm bpi-builder || true
+# Vytvoření a aktivace nového
+docker buildx create --use --name bpi-builder
+docker buildx inspect --bootstrap
+</code>
+==== 3. Spusťte build znovu s parametrem platformy ====
+for non cache:
+<code>
+sudo docker buildx build --platform linux/arm/v7 --build-arg BUILD_FROM="ghcr.io/home-assistant/armv7-homeassistant-base:latest" --build-arg BUILD_ARCH="armhf" --file Dockerfile --no-cache -t local-qemuarm-homeassistant:latest .
+</code>
+for cache:
+<code>
+mkdir -p .buildx-cache
+sudo docker buildx build --platform linux/arm/v7 --build-arg BUILD_FROM="ghcr.io/home-assistant/armv7-homeassistant-base:latest" --build-arg BUILD_ARCH="armhf" --file Dockerfile --cache-from type=local,src=.buildx-cache --cache-to type=local,dest=.buildx-cache,mode=max -t local-qemuarm-homeassistant:latest --load .
+</code>