Differences

This shows you the differences between two versions of the page.

--- public:home_assistant [2026/10/30 13:09] – [Home Assistant on 32bit arm] lukas
+++ public:home_assistant [2026/11/11 06:24] (current) – [Remote Console] lukas
@@ Line 1: / Line 1: @@
+====== Remote Console ======
+minicom can use it by connecting through a virtual serial port created with socat. On the computer where you’ll run minicom.\\
+Prepareation:
+<code>
+sudo apt install socat minicom
+mkdir -p ~/dev
+</code>
+Open Socket:
+<code>
+socat pty,link=$HOME/dev/ttyV0,rawer,echo=0,waitslave tcp:10.10.1.111:6638
+</code>
+Connect with minicom:
+<code>
+minicom -D ~/dev/ttyV0 -b 115200 -C serial_output01.log
+</code>
 ====== Current_measurement ======
@@ Line 6: / Line 24: @@
 ====== Home Assistant on 32bit ======
 https://community.home-assistant.io/t/hass-hassos-on-an-old-32-bit-laptop/400235\\
+https://blog.lesterpig.com/post/install-home-assistant-core-2025.12-on-armv7/\\
 ====== OPOP Integration ======
@@ Line 19: / Line 38: @@
 ====== Home Assistant on 32bit arm ======
+ghcr.io/home-assistant/qemuarm-homeassistant:2025.11
+====== Build Home Assistant on 32bit arm ======
 [[public:home_assistant-docker-cache|Home Assistant Docker Cache]]\\
 [[public:home_assistant-docker-no-cache|Home Assistant Docker No Cache]]\\
 [[public:home_assistant-docker-beter-division|Home Assistant Docker Better Division]]\\
+[[public:home_assistant-docker-merge-last-armv7-image|Home Assistant Docker merge last armv7 image with actual one]]\\
+[[public:home_assistant-docker-builded-image|Home Assistant Docker builded image armv7]]\\
+[[public:home_assistant-docker-build-wheels|Home Assistant Docker build wheels for armv7]]\\
+https://contributors.home-assistant.io/core/development/environment/#manual-setup\\
 ==== 1. Zapněte podporu QEMU v Dockeru ====