====== Remote Console ======
minicom can use it by connecting through a virtual serial port created with socat. On the computer where you’ll run minicom.\\

Prepareation:
<code>
sudo apt install socat minicom
mkdir -p ~/dev
</code>

Open Socket:
<code>
socat pty,link=$HOME/dev/ttyV0,rawer,echo=0,waitslave tcp:10.10.1.111:6638
</code>

Connect with minicom:
<code>
minicom -D ~/dev/ttyV0 -b 115200 -C serial_output01.log
</code>
====== Current_measurement ======

https://github.com/klaasnicolaas/home-assistant-glow/\\
https://glow-energy.io/docs/reference/cases/

====== Home Assistant on 32bit ======
https://community.home-assistant.io/t/hass-hassos-on-an-old-32-bit-laptop/400235\\
https://blog.lesterpig.com/post/install-home-assistant-core-2025.12-on-armv7/\\

====== OPOP Integration ======

https://forum.mypower.cz/viewtopic.php?t=12424\\
https://github.com/mariusz-ostoja-swierczynski/tech-controllers\\

====== Seriál Home Assistant a domácí automatizace ======

https://www.root.cz/serialy/home-assistant-a-domaci-automatizace/


====== Home Assistant on 32bit arm ======

ghcr.io/home-assistant/qemuarm-homeassistant:2025.11

====== Build Home Assistant on 32bit arm ======
[[public:home_assistant-docker-cache|Home Assistant Docker Cache]]\\
[[public:home_assistant-docker-no-cache|Home Assistant Docker No Cache]]\\
[[public:home_assistant-docker-beter-division|Home Assistant Docker Better Division]]\\

[[public:home_assistant-docker-merge-last-armv7-image|Home Assistant Docker merge last armv7 image with actual one]]\\

[[public:home_assistant-docker-builded-image|Home Assistant Docker builded image armv7]]\\


[[public:home_assistant-docker-build-wheels|Home Assistant Docker build wheels for armv7]]\\

https://contributors.home-assistant.io/core/development/environment/#manual-setup\\

==== 1. Zapněte podporu QEMU v Dockeru ====

<code>
docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
</code>

==== 2. Vytvořte čistý Buildx Builder (Doporučeno) ====

<code>
# Odstranění starého builderu (pokud existuje)
docker buildx rm bpi-builder || true

# Vytvoření a aktivace nového
docker buildx create --use --name bpi-builder
docker buildx inspect --bootstrap
</code>

==== 3. Spusťte build znovu s parametrem platformy ====

for non cache:
<code>
sudo docker buildx build --platform linux/arm/v7 --build-arg BUILD_FROM="ghcr.io/home-assistant/armv7-homeassistant-base:latest" --build-arg BUILD_ARCH="armhf" --file Dockerfile --no-cache -t local-qemuarm-homeassistant:latest .
</code>

for cache:
<code>
mkdir -p .buildx-cache

sudo docker buildx build --platform linux/arm/v7 --build-arg BUILD_FROM="ghcr.io/home-assistant/armv7-homeassistant-base:latest" --build-arg BUILD_ARCH="armhf" --file Dockerfile --cache-from type=local,src=.buildx-cache --cache-to type=local,dest=.buildx-cache,mode=max -t local-qemuarm-homeassistant:latest --load .
</code>