minicom can use it by connecting through a virtual serial port created with socat. On the computer where you’ll run minicom.
Prepareation:
sudo apt install socat minicom mkdir -p ~/dev
Open Socket:
socat pty,link=$HOME/dev/ttyV0,rawer,echo=0,waitslave tcp:10.10.1.111:6638
Connect with minicom:
minicom -D ~/dev/ttyV0 -b 115200 -C serial_output01.log
https://community.home-assistant.io/t/hass-hassos-on-an-old-32-bit-laptop/400235
https://blog.lesterpig.com/post/install-home-assistant-core-2025.12-on-armv7/
https://forum.mypower.cz/viewtopic.php?t=12424
https://github.com/mariusz-ostoja-swierczynski/tech-controllers
ghcr.io/home-assistant/qemuarm-homeassistant:2025.11
Home Assistant Docker Cache
Home Assistant Docker No Cache
Home Assistant Docker Better Division
Home Assistant Docker merge last armv7 image with actual one
Home Assistant Docker builded image armv7
Home Assistant Docker build wheels for armv7
https://contributors.home-assistant.io/core/development/environment/#manual-setup
docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
# Odstranění starého builderu (pokud existuje) docker buildx rm bpi-builder || true # Vytvoření a aktivace nového docker buildx create --use --name bpi-builder docker buildx inspect --bootstrap
for non cache:
sudo docker buildx build --platform linux/arm/v7 --build-arg BUILD_FROM="ghcr.io/home-assistant/armv7-homeassistant-base:latest" --build-arg BUILD_ARCH="armhf" --file Dockerfile --no-cache -t local-qemuarm-homeassistant:latest .
for cache:
mkdir -p .buildx-cache sudo docker buildx build --platform linux/arm/v7 --build-arg BUILD_FROM="ghcr.io/home-assistant/armv7-homeassistant-base:latest" --build-arg BUILD_ARCH="armhf" --file Dockerfile --cache-from type=local,src=.buildx-cache --cache-to type=local,dest=.buildx-cache,mode=max -t local-qemuarm-homeassistant:latest --load .